U shape auto duct line 5 Main Import Configuration

U shape auto duct line 5 Advantages

  1. The machine is U-shaped, easy to install and it’s suitable for small-sized or mid-sized work-shops because it occupies a small piece
  2. The injection holes are used at both ends of the driveshaft, to enhance the bearing life.
  3. Power bending function is used to prevent generating waste and make sure of perfect bending accuracy.
  4. It only takes 20-25 seconds to make one L-shaped workpiece and the efficiency will double compared with the linear type.
  5. Without moving back and forth the fixed locking machine is able to improve efficiency.
  6. All the rolling reels are made of bearing steel so that the lifetime prolongs by more than 5 times.
  7. Under the material-saving mode of the CNC system, waste is less than 20mm per roll.
  8. With production memory functions, the production orders can be tracked and checked.
  9. It only needs one or two-person to operate, Save a lot of labor and increase the production efficiency

    U shape auto duct line 5 Main Import Configuration

    1. Japan Omron encoder
    2. Schneider electrical system
    3. Delta control system (Siemens and Mitsubishi brand can also be customized)
    4. Taiwan AirTAC Cylinder

    U shape auto duct line 5 Basic Configuration

    1. Two electric coil cradles, 4 material trays (5-7t each roll)
    2.  One rack
    3. One host (line 2 host)
    4. Two stainless steel roller conveyer platforms
    5. One fixed joint locking machine
    6. One duplex TDF flange forming machine
    7. One duplex angle steel flange forming machine
    8. One servo feeding platform
    9. One hydraulic folding machine
    10. One set of computer controlling system

    U shape auto duct line 5 Bending gripper

    The original cylinder of AirTAC, with a service life of 3-5 million times.

    U shape auto duct line 5 Guide conveyor belt

    Guide conveyor belt: guide seamless overall conveyor belt work in with guide groove type sheet metal, effectively prevent feeding deviation.

    Electrified induction bending function

    using the electrified principle of metal, the left and right of the sheet simultaneously contact with the plate material before bending. It can effectively prevent material waste when bending, greatly improve the yield of finished products.

    U shape auto duct line 5 Dedicated brake motor

    We are the first manufacturer to use the brake motor in this device of china, with the use of built-in brake disc, power on to release the brake, effectively prevent feeding skidding, ensure the accuracy.

    Oil injection holes are added at both ends of the forming roller shaft of the whole machine to greatly increase the service life of the rolling wheel.

    With the external thread locking method, effectively prevent looseness, plate forming more beautiful and stable.

Share This Story, Choose Your Platform!