Super automatic duct forming line 5 Product Description
Main imported Configuration:
1. Japan Mitsubishi CNC system+Schneider electrical system
2. Beijing Huade or hydraulic system from Taiwan
3. Japan Omron encoder
Basic Configuration:
1. One electric coil cradle(two material trays)
2. One set leveling and beading equipment
3. Hydraulic angle-shearing machine with four sets of die
4. Hydraulic sheet-shearing machine,hydraulic bending machine,hydraulic press machine
5. A set of CNC computer control system and production software
Performance Features:
1.During feeding mechanism with pneumatic servo manipulator helps to ensure stability and
speed of the machine, and the accuracy of its locating system.
2.It only takes 20-25 seconds to make one L-shaped workpiece and the efficiency will double
comparing with the linear type.
3.Without moving back and forth the fixed locking machine is able to improve the efficiency.
4.All the rolling reels are made of bearing steel so that the lifetime prolongs by more than 5 times.
5.Under the material-saving mode of CNC system, waste is less than 20 mm per roll.
6.With production memory functions, the production orders can be tracked and checked.
1.During feeding mechanism with pneumatic servo manipulator helps to ensure stability and
speed of the machine, and the accuracy of its locating system.
2.It only takes 20-25 seconds to make one L-shaped workpiece and the efficiency will double
comparing with the linear type.
3.Without moving back and forth the fixed locking machine is able to improve the efficiency.
4.All the rolling reels are made of bearing steel so that the lifetime prolongs by more than 5 times.
5.Under the material-saving mode of CNC system, waste is less than 20 mm per roll.
6.With production memory functions, the production orders can be tracked and checked.
